close

Tactical Vehicle Hood

Tactical Vehicle Hood

These parts are used for covering of an engine part of the front of a tactical vehicle, and have the soundproof function and foothold function at the time a field warfare.

Product packaging and Shipping conditions

50kgs/Pallet

Download related information

Product info

Business Field Market Manufacturer Department
Composites Mobility KoreaComposite R&D Center

product description

RTM molding(Resin transfer molding)

  • RTM molding is a method of laminating a fabric into a press mold, closing the upper mold, then injecting the resin.
  • Because the molding method involves the resin pushing through the void space, it can be expected to produce the product property of vacuum molding, and mass-production is possible because of its good workability.
Test item Test method Unit Category Test result Requirements
Chemical resistance MS 655-08 : 5th 1 Chemical Exterior Color change and degradation
gasoline No color change, discoloration, swelling, cracks, exposure of substrate etc. on gasoline coating film 4-5 There should be no color change, discoloration, swelling, cracks, exposure of substrate etc. on the film Gray scale(Grade 3 or more)
Polish wax 4-5
Glassdetergent 4-5
Ethyl alcohol 4-5
Acetone 4-5
Gloss MS 655-08 : 5th 1 86.1
Water resistance MS 655-08 : 5th 1 Exterior No discoloration, change of color, cracking, gloss degradation, on the coating film No discoloration, change of color, cracking, gloss degradation, on the coating film, andAdhesive is M-1, 0 ~ Within M~2.5 / Color difference(△E*) : 2.0 or less / Gray scale(Grade 3 or more)
Adhesive M-1.0
Color difference(

(△E*)

0.46
Gray scale(Grade) 4-5
Scratch resistance MS 655-08 : 5th Grade 1 4 3.5 or more
Moisture resistance MS 655-08 : 5th 1 Exterior No discoloration, change of color, cracking, gloss degradation, on the coating film No discoloration, change of color, cracking, gloss degradation, on the coating film, and adhesive is M-1, 0 ~ Within M~2.5 / Color difference(△E*) : 2.0 or less / Gray scale(Grade 3 or more)
Adhesive M-1.0
Color difference

(△E*)

0.51
Gray scale(Grade) 4-5
Exterior No color change, discoloration, swelling, cracks, exposure of substrate etc. on the film There should be no color change, No color change, discoloration, swelling, cracks, exposure of substrate etc. on the film There should be no color change, discoloration, swelling, cracks, exposure of substrate etc. on the film Gray scale(Grade 3 or more)
Alkali resistance MS 655-08 : 5th 1 Gray scale(Grade) 4-5
Salt Spray Resistance MS 655-08 : 5th 1 Exterior No discoloration, change of color, cracking, gloss degradation, on the coating film No discoloration, change of color, cracking, gloss degradation, on the coating film, andAdhesive is M-1, 0 ~ Within M~2.5 / Color difference(△E*) : 2.0 or less / Gray scale(Grade 3 or more)
Adhesive(Grade) M-1.0
Color difference

(△E*)

0.18
Gray scale(Grade) 4-5
Pencil Hardness MS 655-08 : 5th 1 H or more HB or more

< Material report >SampleName: Resin for FRP[G-689S(Y)(UP-G)]

Test item Unit Sample Category Results Test method
No abnormality on exterior No abnormality KS M 3305 : 2009
Density g/mL 1.116 KS M 3305 : 2009
Acid value (part acid value) KOH 24.3 KS M 3305 : 2009
mg/g
Viscosity(25 ± 1)℃) mPa.s 314 KS M 3305 : 2009(*)
room temperature gelling time min 17.9 KS M 3305 : 2009(**)

* Bookfield Viscometer, LV2, 30 r/min / ** Mixing ratio = main material : hardener = 100 : 1 (volume ratio)

Supply Ability

  • Process : Hand Lay-up → Sanding → Painting → AssemblyLead Time : 3days

Packing & Delivery

    • Packaging Details : 50kgs

Contacts

Doojin Baek
+82-10-3684-8412
onlybback@idongsung.com

Contact supplier